The good news is the wing kit leaves the US on the 8th of August. Until it arrives however, there is a number of things that I am trying to get finished off so I can focus on the wings when it gets here.
The horizontal stabiliser and elevator are out for media blasting and finish welding. They needed work as they are just starting to get surface rust just sitting in the garage bare and I want to get some primer on them. Thats what you get with humidity I guess.
I am now riveting the upper wing fuel tank. Should have that finished quite quickly but will wait to have it welded because I need to check the clearances in the wing and particularly underneath the tank to make sure the clearance of the drain/fuel line flanges are acceptable. I will build a drilling template also to locate the holes in the lower surface of the wing.
I am also still completing the second and last butt rib for the upper wing, which is different than a butt rib from the standard wing. This rib is a 1/2″ think rather than the standard 1/4″ and has the compression wood within it.
Finally I have been playing with the cabane struts, having been fortunate to scrounge some streamline tubing from a fellow builder in Canberra. Thanks Lou!!